View 74VHCT574A_283458.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74VHCT574A Octal D-Type Flip-Flop with 3-STATE Outputs
July 1997 Revised April 1999
74VHCT574A Octal D-Type Flip-Flop with 3-STATE Outputs
General Description
The VHCT574A is an advanced high speed CMOS octal flip-flop with 3-STATE output fabricated with silicon gate CMOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. This 8-bit D-type flipflop is controlled by a clock input (CP) and an Output Enable input (OE). When the OE input is HIGH, the eight outputs are in a high impedance state. Protection circuits ensure that 0V to 7V can be applied to the input and output (Note 1) pins without regard to the supply voltage. This device can be used to interface 3V to 5V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages.
Note 1: Outputs in OFF-State.
Features
s High speed: fMAX = 140 MHz (typ) at TA = 25C s Power Down Protection is provided on all inputs and outputs. s Low Noise: VOLP = 1.6V (max) s Low Power Dissipation: ICC = 4 A (max) @ TA = 25C s Pin and Function Compatible with 74HCT574
Ordering Code:
Order Number 74VHCT574AM 74VHCT574ASJ 74VHCT574AMTC 74VHCT574AN Package Number M20B M20D MTC20 N20A Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter "X" to the ordering code.
Logic Symbol
IEEE/IEC
Connection Diagram
Pin Descriptions
Pin Names D0-D7 CP OE O0-O7 Description Data Inputs Clock Pulse Input 3-STATE Output Enable Input 3-STATE Outputs
(c) 1999 Fairchild Semiconductor Corporation
DS500029.prf
www.fairchildsemi.com
74VHCT574A
Functional Description
The VHCT574A consists of eight edge-triggered flip-flops with individual D-type inputs and 3-STATE true outputs. The buffered clock and buffered Output Enable are common to all flip-flops. The eight flip-flops will store the state of their individual D inputs that meet the setup and hold time requirements on the LOW-to-HIGH Clock (CP) transition. With the Output Enable (OE) LOW, the contents of the eight flip-flops are available at the outputs. When the OE is HIGH, the outputs go to the high impedance state. Operation of the OE input does not affect the state of the flipflops.
Truth Table
Inputs Dn H L X
H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Z = High Impedance = LOW-to-HIGH Transition
Outputs OE L L H On H L Z
CP

X
Logic Diagram
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
www.fairchildsemi.com
2
74VHCT574A
Absolute Maximum Ratings(Note 2)
Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) (Note 3) (Note 4) Input Diode Current (IIK) Output Diode Current (IOK) (Note 5) DC Output Current (IOUT ) DC VCC/GND Current (ICC) Storage Temperature (TSTG) Lead Temperature (TL) (Soldering, 10 seconds) 260C -0.5V to VCC + 0.5V -0.5V to +7.0V -20 mA 20 mA 25 mA 75 mA -65C to +150C -0.5V to +7.0V -0.5V to +7.0V
Recommended Operating Conditions (Note 6)
Supply Voltage (VCC) Input Voltage (VIN) Output Voltage (VOUT) (Note 3) (Note 4) Operating Temperature (TOPR) Input Rise and Fall Time (tr, tf) VCC = 5.0V 0.5V 0 ns/V 20 ns/V
Note 2: Absolute Maximum Ratings are values beyond which the device may be damaged or have its useful life impaired. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside databook specifications. Note 3: HIGH or LOW state. IOUT absolute maximum rating must be observed. Note 4: When outputs are in OFF-State or when VCC = OV. Note 5: VOUT < GND, V OUT > VCC (Outputs Active). Note 6: Unused inputs must be held HIGH or LOW. They may not float.
4.5V to +5.5V 0V to +5.5V 0V to VCC 0V to +5.5V -40C to +85C
DC Electrical Characteristics
Symbol VIH VIL VOH VOL IOZ IIN ICC ICCT IOFF Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage 3-STATE Output Off-State Current Input Leakage Current Quiescent Supply Current Maximum ICC/Input Output Leakage Current (Power Down State) VCC (V) 4.5 5.5 4.5 5.5 4.5 4.5 5.5 0-5.5 5.5 5.5 0.0 4.40 3.94 0.0 0.1 0.36 0.25 0.1 4.0 1.35 0.5 4.50 TA = 25C Min 2.0 2.0 0.8 0.8 4.40 3.80 0.1 0.44 2.5 1.0 40.0 1.50 5.0 Typ Max TA = -40C to +85C Min 2.0 20 0.8 0.8 Max Units V V V V V V A A A mA A VIN = VIH VIN = VIH IOH = -50 A IOL = 50 A Conditions
or VIL IOH = -8 mA or VIL IOL = 8 mA VIN = VIH or VIL VOUT = VCC or GND VIN = 5.5V or GND VIN = VCC or GND VIN = 3.4V Other Input = VCC or GND VOUT = 5.5V
3
www.fairchildsemi.com
74VHCT574A
Noise Characteristics
Symbol VOLP (Note 7) VOLV (Note 7) VIHD (Note 7) VILD (Note 7)
Note 7: Parameter guaranteed by design.
Parameter Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL Minimum HIGH Level Dynamic Input Voltage Maximum LOW Level Dynamic Input Voltage
VCC (V) 5.0 5.0 5.0 5.0
TA = 25C Typ 1.2 -1.2 Limits 1.6 -1.6 2.0 0.8
Units V V V V
Conditions CL = 50 pF CL = 50 pF CL = 50 pF CL = 50 pF
AC Electrical Characteristics
Symbol tPLH tPHL tPZL tPZH tPLZ tPHZ tOSLH tOSHL fMAX CIN COUT CPD Parameter Propagation Delay Time 3-STATE Output Enable Time 3-STATE Output Disable Time Output to Output Skew Maximum Clock Frequency Input Capacitance Output Capacitance Power Dissipation Capacitance VCC (V) 5.0 0.5 5.0 0.5 5.0 0.5 5.0 0.5 5.0 0.5 90 85 140 130 4 9 25 10 TA = 25C Min Typ 4.1 5.6 6.5 7.3 7.0 Max 9.4 10.4 10.2 11.2 11.2 1.0 80 75 10 TA = -40C to +85C Min 1.0 1.0 1.0 1.0 1.0 Max 10.5 11.5 11.5 12.5 12.0 1.0 Units ns ns ns ns MHz pF pF pF VCC = Open VCC = 5.0V (Note 9) RL = 1 k RL = 1 k (Note 8) CL = 15 pF CL = 50 pF Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF CL = 50 pF
Note 8: Parameter guaranteed by design. tOSLH = |tPLH max - t PLH min|; tOSHL = |tPHL max - tPHL min| Note 9: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) = CPD * VCC * fIN + ICC/8 (per F/F). The total CPD when n pcs. of the Octal D Flip-Flop operates can be calculated by the equation: CPD (total) = 20 + 12n.
AC Operating Requirements
Symbol tW(H) tW(L) tS tH Minimum Set-Up Time Minimum Hold Time 5.0 0.5 5.0 0.5 2.5 2.5 2.5 2.5 ns Parameter Minimum Pulse Width (CP) VCC (V) 5.0 0.5 TA = 25C Min 6.5 Typ Max TA = -40C to +85C Min 8.5 Max ns Units
www.fairchildsemi.com
4
74VHCT574A
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide Package Number M20B
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D
5
www.fairchildsemi.com
74VHCT574A
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20
www.fairchildsemi.com
6
74VHCT574A Octal D-Type Flip-Flop with 3-STATE Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N20A
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user.
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.

▲Up To Search▲

Price & Availability of 74VHCT574A

	To Download 74VHCT574A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .